This means the Windows steps below must be done for each EnSURE Touch that will be connected to this computer.
#Tethering usb serial number
Each EnSURE Touch has a unique serial number that is bound to the Windows RNDIS driver. The following are the steps to enable USB Tethering.
#Tethering usb driver
Success is dependent on the Windows 10 computer ability to support the network adapter driver and ICS configuration. USB Tethering has not been tested on every Windows 10 computer.Attempting to Sync or perform any network functions during this delay will result in failure. The delay is about 30 seconds depending on the computer. Reconnecting the EnSURE Touch to the Windows 10 computer will reestablish the network adapter and ICS setting, but there is a short delay. Once configured, disconnecting the EnSURE Touch will remove the network adapter from Windows 10.You can configure multiple instruments on one computer, but only one can be connected at a time. Only one EnSURE Touch can be connected at a time.Windows 10 knowledge and ability to navigate to Device Manager and Windows Network Connections.USB Cable that comes with the EnSURE Touch.Permissions to configure Windows Internet Connection Sharing (ICS).
#Tethering usb install
Permissions to install Windows 10 RNDIS6 driver.Windows 10 computer with an internet connection and an EnSURE Touch.EnSURE Touch can be connected to a Windows 10 computer using the USB cable that comes with EnSURE Touch and share the internet connection of the Windows 10 computer. In some cases, Wi-Fi is not available or acceptable. Most customers will use the Wi-Fi features of EnSURE Touch. It will also cover the requirements and troubleshooting steps.ĮnSURE Touch needs an internet connection to communicate with SureTrend Cloud. This document will cover the step by step instructions for configuring USB Tethering on the EnSURE™ Touch.
0 kommentar(er)
